Strait Supplies

MAKITA PRODUCTS


4-3/8" Masonary Saw Wet Cutting Features: For wet cutting of tile, masonry, concrete and more Powerful 7.9 AMP motor Adjustable depth of cut Special cover design prevents water from entering into motor housing Cuts up to 1-3/8" at 90° and 13/16" at 45° Ground fault circuit interrupter plug Lock-on button for continuous use operation Includes 15 ft. of tubing, water pressure regulator and water valve. (4101RH) 4-3/8" Circular Saw Features: Blade on left side High power to weight ratio; 7.8 AMP 11,000 RPM for fast cutting in a variety of materials Ball and needle bearing construction for smooth operation and long tool life Well balanced and lightweight for easy handling Lock-off button helps prevent accidental starting Dry cutting of stone and masonry with optional diamond blade. Double insulated. (4200H) 16-5/16" Circular Saw With Electric Brake Features: One of the largest portable saws on the market 16-5/16" blade cuts 6-3/16" at 90° and 4-3/16" at 45° Weighs only 30.8 lbs. for ease of operation Electric brake for fast stopping of the blade Powerful 12 AMP motor for heavy duty operation; 2,200 RPM Precision gearing with ball and needle bearing for smooth and efficient power transmission. (5402A) 10" Table Saw With Electric Brake Features: Powerful 15 AMP motor for smooth cutting Lightweight (40 lbs.) and portable for easy transporting to the job site Large 27" x 22" table Electric brake for quick and efficient adjustments Dead-on cam locking rip fence Large handle for quick and accurate depth setting Precise rack and pinion bevel adjustment Positive stops at 90° and 45° Rips 4x material on a single pass. (2703) Scroll Saw Features: Electronic variable speed control for cutting a wide variety of materials Bevel cuts up to 45° to the left and 15° to the right Parallel arm mechanism provides efficient and accurate cutting Tool-free blade change for easy changing of pin-ended blades Blade tension lever for quick adjustment of blade tension Cast iron base for stability and vibration-free cutting. (SJ401) Random Orbit Sander Features: Palm-size sander for easy one handed operation Light weight (2.9 lbs.) design Random-orbit action for a super smooth finish 5/32" orbit diameter for fast finishing Especially engineered for low vibration Uses quick changing hook-and-loop system abrasive discs Optional hose attachment and vacuum for clean, dustless operation (BO5001) 4" x 24" Belt Sander Features: Powerful 11 AMP motor for high production use Belt speed of 1,640 ft./min. for fast material removal Low noise (only 84db) for quieter operation Labyrinth construction seals motor and bearings from contamination Large front grip is positioned for operator comfort Cord is located on the upper portion of the handle for operator convenience Dust bag swivels 360° for more convenient operation Double insulated. (9403) Straight Shear Features: Fast cutting action up to 20 gauge mild steel, 24 gauge stainless steel and 1/16" aluminum Minimum outside cutting radius of 1-3/16" for close right or left curve cuts with a smooth edge Removes a continuous metal curl with no material distortion Compact and light weight (2.9 lbs.) Sliding thumb on/off switch for easy one-handed operation Double insulated. (JS1670) Blade Sharpener Features: Large 7-7/8" aluminum-oxide wheel for efficient sharpening Quiet motor and 560 RPM for a fine finish Sharpens planer blades (knives) up to 15-3/4" long Water feed for cooling blades Lightweight and easy transporting. (9820-2)	Jig Saw Variable Speed Features: Variable speed dial for setting maximum cutting speed (500 - 3,100 SPM) Bevel cuts up to 45° right or left Positive stops at 90° and 45° Large trigger switch for easy operation Lock-on button for extended use Low noise at only 82dB Low vibration for steady handling Sliding dust cover keeps chips from flying and makes blade replacement easy Hex wrench stores conveniently on the tool Attaches easily to Makita vacuum for a cleaner work environment For use with tang shank blades only. (4323) 14" Miter Saw Features: Powerful 12 AMP motor for excellent performance Positive stops at 9 settings: 15°, 22.5°, 30°, 45°, right or left and 0° (90° cuts) Self-aligning center plates on the guide fence for less splintering Quick release vise for fast repeat cut-offs Cuts 6" wide at 90° and 4-1/2" at 45° (LS1440) Recipro Saw Variable Speed Features: "Tool-less" blade change by simply pushing a button Variable speed (0 - 2,600 SPM) for precise cutting in a wide variety of materials Powerful 8 AMP motor for continuous operation Long 1-1/8" stroke length for faster cutting All ball and needle bearings for longer tool life Accepts standard 1/2" shank blades Heavy-duty shoe features "tool-less" adjustment Blade can be inverted for near flush cutting Lightweight for operator comfort Externally accessible carbon brushes for easy replacement Double insulated. (JR3030T) 12" Metal Cutting Saw Features: For fast cutting in light pipe, angle iron, tubing, conduit and channels D-shape handle for positive control Long lasting carbide tipped blade for cost efficient, clean and accurate cutting; virtually burr free Lock-off button prevents accidental starting "Tool-less" guide plate adjusts 0 - 45° for miter cutting Quick release vise for secure stock retention and fast repeated cut-offs Socket wrench stores on base for convenience Shaft lock for easy wheel changes. (LC1230) 4" Angle Grinder Features: Switch is located on top of motor housing Small circumference barrel grip for easy handling High power-to-weight ratio Labyrinth construction seals motor and bearings from contamination Spindle lock for easy wheel changes Side handle can be installed on either side of tool Double insulated. (9523NBH) 7" Polisher Features: Ideal polishing speed (2,000 RPM) for a wide variety of surfaces including automotive, woodworking, boat and plastic industry applications Motor over pad design for better balance and control All ball and needle bearing construction for more efficient power transmission and longer tool life Lock-on button for reduced operator fatigue during extended operation Standard 5/8" - 11 UNC spindle for greater accessory availability Double insulated. (9218PB) Nibbler Features: Clean and precise work in keystone plate, deck plate and other corrugated sheet materials Die rotates 360° Large 1/4" stroke Ergonomic, slim body design for easy gripping Extremely light (weighs only 3.5 lbs.) for easy handling Lock-on sliding switch for continuous use Built-in thickness gauge for convenience Easy punch and die replacement for less down time Double insulated. (JN1601)
<< Back to Industrial Division